Everyone

AMD (Advanced Micro Devices, Inc.)

Nougat

Take VR streaming to the next level with Radeon™ ReLive for VR! Supporting select* Radeon™ VR Ready Premium graphics cards, Radeon™ ReLive VR app enables high quality wireless PC VR gaming on your standalone Daydream headset. 

GET STARTED QUICKLY

Simply launch SteamVR™, connect via the Radeon™ ReLive VR app & open a game to start playing. 

FEATURES

- Radeon™ ReLive streaming pipeline built specifically for low latency VR

- Wireless VR made possible through positional tracking of HTC Vive Focus and Radeon™ GPU headset optimizations

- Easily start gaming with third party Bluetooth controller compatibility**

- Stream at an immersive 1440x1440p resolution

INSTRUCTIONS

- Steam and SteamVR need to be installed in your PC

- Make sure your PC is connected to a 5GHz (802.11ac) router or a wireless access point with an Ethernet cable (Cat-5e or Cat-6 recommended)

- Enable Remote Play in the Radeon™ Settings -> ReLive -> Game & VR Streaming tab and then flip the SteamVR Integration switch to Enabled to enable Radeon™ Relive VR. 

- Allow incoming network traffic on Windows Firewall, if prompted.

- Run SteamVR on your PC.

- Install the Relive VR app on your Daydream device

- Make sure your Daydream device is connected to the same router/AP as your PC running SteamVR. Use the 5GHz SSID (usually has “5G” or “5GHz” or “AC” in its name for most routers) – note that 2.4GHz networks (802.11n or earlier) are not recommended for a good wireless VR experience.

- Run the Relive VR app. It will find your PC running SteamVR and connect to it automatically.

Compatible with AMD Radeon™ RX 470, RX 570, RX 480, RX 580, RX 590 & RX Vega series products & supports Windows® 10. Recommended experience on Radeon™ RX Vega series graphics cards. Controllers must be compatible with selected game and headset, please consult vendor for compatibility information. 

**PC game compatibility depends on headset capability. Please see www.AMD.com/ReLive

使用Radeon™ReLive for VR将VR流媒体提升到新的水平！ Radeon™ReLive VR应用程序支持精选* Radeon™VR Ready Premium显卡，可在您的独立Daydream耳机上实现高品质无线PC VR游戏。

快速入门

只需启动SteamVR™，通过Radeon™ReLive VR应用程序连接并打开游戏即可开始游戏。

特征

 - 专为低延迟VR而构建的Radeon™ReLive流媒体管道

 - 通过HTC Vive Focus和Radeon™GPU耳机优化的位置跟踪实现无线VR

 - 通过第三方蓝牙控制器兼容性轻松开始游戏**

 - 以沉浸式1440x1440p分辨率流式传输

说明

 - 需要在PC中安装Steam和SteamVR

 - 确保您的PC连接到5GHz（802.11ac）路由器或带有以太网电缆的无线接入点（建议使用Cat-5e或Cat-6）

 - 在Radeon™设置 - > ReLive  - > Game＆VR Streaming选项卡中启用远程播放，然后将SteamVR Integration开关翻转为Enabled以启用Radeon™Relive VR。

 - 如果出现提示，则允许Windows防火墙上的传入网络流量。

 - 在PC上运行SteamVR。

 - 在Daydream设备上安装Relive VR应用程序

 - 确保您的Daydream设备连接到与运行SteamVR的PC相同的路由器/ AP。使用5GHz SSID（大多数路由器的名称通常都带有“5G”或“5GHz”或“AC”） - 请注意，不建议使用2.4GHz网络（802.11n或更早版本）以获得良好的无线VR体验。

 - 运行Relive VR应用程序。它会找到运行SteamVR的PC并自动连接到它。

兼容AMD Radeon™RX 470，RX 570，RX 480，RX 580，RX 590和RX Vega系列产品，并支持Windows®10。推荐使用Radeon™RX Vega系列显卡的经验。控制器必须与选定的游戏和耳机兼容，请咨询供应商以获取兼容性信息。

** PC游戏兼容性取决于耳机功能。请访问www.AMD.com/ReLive

Radeon™ ReLive for VR

Radeon™ ReLive for VR的最新版本